FuelCellShop::PostProcessing Namespace Reference

Namespace used for all classes use for post-processing either for evaluating a new quantity at a quadrature point for outputing with the solution, for the evaluation of functions or for the evaluation of functionals such as the current density. More...

Classes
class	BaseResponse
	Virtual class used to develop a common interface to a set of functions used to evaluate functionals that are obtained at postprocessing. More...
class	ORRCurrentDensityDataOut
	Class used to evaluate the ORR current density, overpotential, effectiveness and the oxygen coverages (when applicable) at catalyst layer DoF point in the finite element mesh. More...
class	HORCurrentDensityDataOut
	Class used to evaluate the HOR current density, overpotential and effectiveness at catalyst layer DoF point in the finite element mesh. More...
class	RelativeHumidityDataOut
	Class used to evaluate the relative humidity at PorousLayer (viz., GDL, MPL and CL) DoF point in the finite element mesh. More...
class	CapillaryPressureDataOut
	Class used to evaluate the capillary pressure at PorousLayer (viz., GDL, MPL and CL) DoF point in the finite element mesh. More...
class	SaturationDataOut
	Class used to output saturation inside the layer. More...
class	LiquidVelocityPermeabilityDataOut
	Class used to evaluate the all liquid related the liquid velocity field in all the layers. More...
class	PhaseChangeDataOut
	Class used to evaluate the volumetric condensation and evaporation and the interfacial surface area. More...
class	OxygenDiffusivityDataOut
	Class used to evaluate the all liquid related the liquid velocity field in all the layers. More...
class	MolarFractionDataOut
	Class used to output molar fractions based on the density of each species. More...
class	PermeabilityDataOut
	Class used to evaluate the ORR current density, overpotential, effectiveness and the oxygen coverages (when applicable) at catalyst layer DoF point in the finite element mesh. More...
class	RHSDataOut
class	LHS_Pc_DataOut
class	ORRSOURCEDataOut
class	RHSData_KelvinOut
class	RHSData_KelvinOut_NoTem
class	ORRCurrentDensityResponse
	Class used to calculate the ORR current density and coverages (if provided in the kinetic model) by the catalyst layer. More...
class	HORCurrentDensityResponse
	Class used to calculate the current density at the anode catalyst layer. More...
class	MassFluxResponse
	Class used to calculate the total mass flux at a boundary. More...
class	ElectronOhmicHeatResponse
	Class used to calculate the electronic ohmic heat generated in the electron conducting layers, viz., GDL, MPL and CL. More...
class	ProtonOhmicHeatResponse
	Class used to calculate the protonic ohmic heat generated in the proton conducting layers, viz., Membrane and CL. More...
class	ORRReactionHeatResponse
	Class used to calculate the heat generated due to ORR inside the cathode catalyst layer. More...
class	HORReactionHeatResponse
	Class used to calculate the heat generated due to HOR inside the anode catalyst layer. More...
class	SorptionHeatResponse
	Class used to calculate the heat generated due to sorption of water inside the catalyst layer. More...
class	PhaseChangeResponse
	Class used to calculate the evaporated liquid water in CCL. More...
class	BoundaryLiquidResponse
	Class used to calculate the boundary liquid flux through the boundaries (GDL) in the MEA model. More...
class	BoundaryVaporResponse
	Class used to calculate the boundary vapor flux through the boundaries (GDL) in the MEA model. More...
class	WaterSorptionResponse
	Class used to calculate the amount of water sorbed inside the catalyst layer. More...

Enumerations
enum	ResponsesNames {   nothing = 0, ORR_current, HOR_current, O_coverage,   OH_coverage, sorbed_water, water_cathode, water_anode,   ORR_reaction_heat, HOR_reaction_heat, ORR_irrev_heat, HOR_irrev_heat,   ORR_rev_heat, HOR_rev_heat, ORR_watervap_heat, sorption_heat,   electron_ohmic_heat, proton_ohmic_heat, PEM_proton_ohmic_heat }
	Enumeration with names for different responses: More...

Detailed Description

Namespace used for all classes use for post-processing either for evaluating a new quantity at a quadrature point for outputing with the solution, for the evaluation of functions or for the evaluation of functionals such as the current density.

Namespace used for all classes use for post-processing either for evaluating a new quantity at a quadrature point for outputting with the solution, for the evaluation of functions or for the evaluation of functionals such as the current density.

Enumeration Type Documentation

enum FuelCellShop::PostProcessing::ResponsesNames

Enumeration with names for different responses:

Enumerator
nothing
ORR_current
HOR_current
O_coverage
OH_coverage
sorbed_water
water_cathode
water_anode
ORR_reaction_heat
HOR_reaction_heat
ORR_irrev_heat
HOR_irrev_heat
ORR_rev_heat
HOR_rev_heat
ORR_watervap_heat
sorption_heat
electron_ohmic_heat
proton_ohmic_heat
PEM_proton_ohmic_heat